Are you about to install wallpaper?

Good for you! There’s nothing more exciting than the discovery of beautiful new paper and a chance to give your home a stylish new look. However, like with any project, there are a few best practices that can help things go more smoothly.

Check out these common wallpaper installation mistakes and how to avoid them!

1. Not Determining the Right Size

One of the most common wallpaper installation mistakes is not taking accurate measurements of the wall space before ordering designs for wallpaper. This can result in wallpaper that is too small or too large for the intended space.

To avoid these mistakes, always measure the wall space accurately and order wallpaper accordingly. When installing wallpaper borders, allow for at least 1/2 inch of overlap to ensure a seamless look.

2. Not Trimming the Excess Wallpaper

Another wallpaper installation mistake is not trimming the excess wallpaper. This can cause the wallpaper to bunch up or rip, and it’s difficult to avoid if you’re not careful.

To avoid this mistake, be sure to trim the excess wallpaper away from the edges of the wall before you start hanging it.

3. Failing to Prime the Walls

Another mistake is failing to properly prime the walls. This can result in the wallpaper not adhering properly and eventually peeling away from the wall.

In order to avoid this, be sure to use a primer specifically designed for wallpaper and apply it evenly to the surface before attempting to hang the wallpaper.

4. Applying Incorrect Adhesive

This can cause the wallpaper to loosen and eventually fall off the wall. Always make sure to use the correct adhesive for your particular wallpaper.

If you’re not sure which adhesive to use, consult a wallpaper repair service installer or the manufacturer of the wallpaper.

Another way to avoid these mistakes is to test the adhesive on a small section of the wallpaper before applying it to the entire wall.

5. Skipping the Seam Sealer

Skipping the seam sealer is a common wallpaper installation mistake.

This clear, glue-like product is applied to the seams between sheets of wallpaper to prevent air bubbles and wrinkles. It is especially important to use seam sealer on textured or vinyl wallpapers.

To avoid this mistake, simply read the manufacturer’s instructions carefully and be sure to use seam sealer as directed.

Read More About Wallpaper Installation Mistakes

Be sure to avoid wallpaper installation mistakes measure the wall before cutting the paper-you don’t want it to be too short.

Don’t forget to allow for extra paper at the top and bottom of the wall in case of errors. And be sure to use a smoothing tool to remove any air bubbles after you’ve applied the wallpaper. 

Hire a professional for intricate patterns and make sure you have the right tools for the job. Most importantly, take your time to line up each strip of wallpaper and smooth it out before moving on to the next section.

Did you find this article useful? Check out the rest of our blog for more cryptocurrency !

By Manali